Product no.: 111-805-591/a
Front apron 8/60>67, for long bonnet |
£29.95
|
|
Product no.: 111805591ABQ
Front apron (valance) Two finger type for long bonnet Beetles 1960-67 with bumper slots Best quality made by Autocraft in the UK |
£163.50
|
|
Product no.: 111-805-591/ca
Front apron 1300 - 1600cc 8/67 > |
£20.50
|
|
Product no.: 111-805-591/gr
Front apron 1302/03 without grilles This is the one for most 1302/03's smooth front without any grille |
£37.95
|
|
Product no.: 311-821-335/A
Front valance access hole cover plate and fitting kit on Beetle (not 1302/03), also Type 3 rear ring/torsion bar access cover. Reproduction, 66mm diameter. |
£13.60
|
|
Product no.: 113-809-111
Front inner wing / bumper mount early LHS
Fits all models >67 & 1200cc 68 - 73
|
£30.59
|
|
Product no.: 113-809-112
Front inner wing / bumper mount early RHS
Fits all models >67 & 1200cc 68 - 73
|
£30.59
|
|
Product no.: 113-809-111/A
Front inner wing / bumper mount late LHS
Fits models 1300cc - 1600cc 8/67>
|
£21.96
|
|
Product no.: 113-809-112/a
Front inner wing / bumper mount late RHS
Fits models 1300cc - 1600cc 8/67>
|
£21.96
|
|
Product no.: 111-805-506
Complete US spec front panel, including the front bumper mounts and wheel well. |
£104.95
|
|
Product no.: 113-805-506
Front panel complete, front clip, not 1200, 1302 or 1303 |
£100.00
|
|
Product no.: 111-813-311
Body mounted bonnet and engine lid seal channel, each, 6 lengths required for whole car. |
£9.50
|
|
Product no.: 111-805-583/A
Spare wheel well repair panel, not 1302 or 1303 |
£16.50
|
|
Product no.: 113-805-505/CR
Spare wheel well lower tray with reinforcement panel. |
£54.95
|
|
Product no.: 111-805-585/A
Cover plate for steering box adjustment access holes at rear of spare wheel well. Fits both left and right side. |
£15.10
|
|
Product no.: 111-805-589
Inner cover for the hole at the centre rear of the spare wheel well. |
£11.70
|
|
Product no.: 113-805-451F
Front bulkhead/cross panel, for torsion bar models (not 1302/03). Genuine quality, LHD but can be adapted to RHD. |
£128.95
|
|
Product no.: 111-805-452
Front short double skin bulkhead/cross panel. |
£34.95
|
|
Product no.: 111-805-451/AR
Front tall double skin bulkhead/cross panel, for torsion bar models (not 1302/03) Repro, LHD but can be adapted to RHD |
£49.95
|
|