Print

Push rods & tubes

Push rods & tubes

Push rods & tubes

Display per page
Sort by
1 - 30 of 42 results
Product no.: 311-109-301/A
Applications: T1 66-79 Karmann Ghia 66-74 T2 64-79 -1600cc Type 3 62-73 Standard engine pushrod. Sold individually. To fit 1300-1600cc T1 engines.
£4.65
Product no.: 113-109-335
T1 / Beetle 61-79 1200cc Karmann Ghia 61-79 1200cc T2 / Splitscreen 61-64 Sold individually - 8 required per engine
£3.63
Product no.: 311-109-335

Applications: T1 / Beetle 66-79 Karmann Ghia 66-74 T2 / Splitscreen 64-67 1500cc T2 / Baywindow 68-79 -1600cc Type 3 62-73

£2.60
Product no.: 311-109-335/cad
A better quality version of the standard push rod tube. Cad plated (gold in colour) for rust protection.
£4.03
Product no.: 126-109-335

Spring loaded pushrod tube. An easy replacement for standard leaking pushrod tubes. Each. Require 3x 113-109-345/A pushrod tube seals to fit.

£6.99
Product no.: 113-109-345/A

Pushrod tube seal. Each

£0.75
Product no.: AC1094053-14

Aftermarket 3/8 diameter cut to length 4140 chromoly manton pushrods supplied by Scat. These pushrods are a lot stronger than stock and a must when running an aftermarket camshaft and heavy duty valve springs. These pushrods will be noisier than stock. Supplied in sets of 8 with end plugs.

£90.00
Product no.: AC109433
Aftermarket 3/8 diameter cut to length chromoly pushrods, supplied in sets of 8 including end plugs. These pushrods are a lot stronger than stock and a must when running an aftermarket camshaft and heavy duty valve springs. These pushrods will be noisier than stock.
£59.18
Product no.: AC1094033

Aftermarket stock length steel pushrods manufactured by Scat. These pushrods are stronger than stock and a must when running an aftermarket camshaft and heavy duty valve springs. These pushrods will be noisier than stock. Supplied in sets of 8

£39.99
Product no.: AC109212301
£43.99
Product no.: 111-105-313/A

Needle bearing for end of crank, type 4 engine

£5.95
Product no.: 111-105-213

Woodruff key,timing gear to suit 1.2-1.6 Aircooled & 1.9-2.1 Waterboxer

£5.95
Product no.: 113-105-223

Brass gear on the crankshaft which drives the distributor

£35.00
Product no.: 113-105-224

Gear, distributor. drive, 12/47-, 1st U/Size for Skimmed Case

£46.95
Product no.: 113-105-231/B

Driveshaft for distributor, to suit all Aircooled & 1.9-2.1 Waterboxer

£45.00
Product no.: 111-105-235/A

Distributor drive shim, 0.6mm

£4.30
Product no.: 111-105-233

Distributor driveshaft spring

£4.30
Product no.: AC105050

Crank, Forged 4140 / 69mm

£244.95
Product no.: AC105054

Aftermarket forged 4140 Chromoly counterweighted 76mm crankshaft

£287.95
Product no.: AC105060

Aftermarket forged 4340 Chromoly counterweighted 78mm crankshaft

£319.95
Product no.: AC105070

Aftermarket forged 4340 Chromoly counterweighted 82mm crankshaft

£295.95
Product no.: AC105081

Aftermarket forged 4340 Chromoly counterweighted 84mm crankshaft.

£360.00
Product no.: AC1051145

Crank EMPI Forged 4340, 78mm

£369.95
Product no.: AC105372

Aftermarket Volksracer forged 4340 Chromoly counterweighted 69mm crankshaft manufactured by Scat.

£399.99
Product no.: AC105253

Alloy crankshaft pulley with saw shaped holes and degree markings.

£38.95
Product no.: AC105260

Aftermarket steel equaliser 5.7lbs, Black pulley. Stock diameter.

£93.99
Product no.: AC105261

Aftermarket steel equaliser 5.7lbs pulley. Stock diameter. Designed to reduce crank twist and damp vibration on high revving engines.

£104.95
Product no.: AC105331090

EMPI Steel Billet, 3 1/2 lbs, stock size

£104.95
Product no.: AC1051915

Aftermarket top and bottom pulley shim kit manufactured by CB Performance.

£15.95
Product no.: AC903003

Aftermarket serpentine alternator/dynamo pulley kit.

£213.00
1 - 30 of 42 results